ASCO美國手動電磁閥主要特性

ASCO美國手動電磁閥主要特性  

Watertight, Type 3, 3S, 4, 4X, IP-67. Liquid Crystal Polymer (LCP)

overmolded with 1/2" NPT conduit connection and screw terminals for

simple wiring. The terminal block will accommodate 18 gage (AWG) wire,

and grounding screw is located inside the enclosure.

ISSC: DIN 43650/ISO 4400, IP-65 Epoxy overmolded with Din Connector

supplied, suitable to accept wiring cable diameters of 0.310 to 0.400 inches

防水型，3型，3S，4，4X，IP-67。 液晶聚合物（LCP）

用1/2“NPT導管連接和螺絲端子包覆成型

簡單的布線。 接線盒將容納18號（AWG）電線，

接地螺釘位于外殼內部。

ISSC：DIN 43650 / ISO 4400，IP-65環(huán)氧樹脂與Din連接器包覆成型

提供，適合接受0.310至0.400英寸的線纜直徑

惰性氣體過濾到50微米或更好。 阻止

冷凍，媒體的露點至少應該是

于較溫度18°F（-8°C）

清潔空氣或氣體系統(tǒng)的一部分可能會暴露inert gas filtered to 50 micrometers or better. To prevent

freezing, the dew point of the media should be at least

18°F (-8°C) below the minimum temperature to which any

portion of the clean air or gas system could be exposed.

Instrument air in compliance with ANSI/ISA Standard

S7.3-1975 (R1981) exceeds the above requirements and

Nominal Wattage is 0.35 @ 24 VDC is, therefore, an acceptable medium for these valves.

ASCO美國手動電磁閥主要特性