HYDAC德國進口比例閥產品資料，0240R010ON

HYDAC德國進口比例閥產品資料，0240R010ON

上海乾拓貿易有限公司

聯系人：楊江玲

企業QQ：2880626083

手 機：18917074297（微信）

電 話：021-39529830-8012

郵箱；18917074297@163.com

地址：上海市嘉定區江橋嘉涌路6號樓713室   

recommend hydraulic fluids according to 

maximum flow - due to its nominal size. 

well as the adherence of the operation 

conditions under ?Specifications“ of each datasheet

actuated valves for which the output value

 - pressure or flow - is changed at the same ratio as the inlet value.

Like the ambient temperature the media 

temp. range has a direct effect on the 

 Control electronics and proportionally designed solenoids are required 

z FPM: from -20°C to +120°C 

(all other influences see point 4)

Each valve is designed for a certain 

temperature depends primarily on the 

sealing materials. HYDAC defines here:

z NBR: from -30°C to +100°C 

At ths flow it is still reasonable to operate 

the valve. An operation above this value 

used materials in the valve, e.g. their 

mech. strength. Generally, the maximum 

HYDAC offers here pressure relief, pressure reducing, needle,

 flow control, and directional valves. 

We confirm the usage of basically 

(solenoid valves - 20°C)

DIN 51524 Part 1 and 2. For these fluids 

for actuation. Just as it is true in the hydrovalve sector, 

HYDAC proportional valves are electronically 

will boost the power dissipation. This 

value also varies from valve to valve.

3. TYPE OF HYDRAULIC FLUID

The type of operating fluid is closely 

linked to its viscosity. HYDAC can only 

the function of the valves is warranted

and approved safety principals to 

ISO 13849?2:2003; charts C.1 and C.2 

for the design of our hydraulic valves. 

(Confirmation in each datasheet of the valve)

The customer is responsible for the 

implementation and the operation of 

our valves due to th a.m. standard as 

HYDAC德國進口比例閥產品資料，0240R010ON