YSTHK直線板式導軌,THK直線板式導軌作用
直線板式導軌是一種薄輕型直線導軌。
直線導軌適于測量儀器、
半導體制造和檢驗設備以及其他直線運動至為重要的應用場合。
3 action speed, acceleration and deceleration and other specifications by the load quality limit.
See P.26 ~ 32 "GLM20AP Selection Method".
與角接觸球軸承的雙列式樣相比,此產品實現了緊湊化及輕量化。
較大限度使結構緊湊的同時,也具有高剛性。
※4 設定可搬送質量為加速度約2G、到達較高速度1.0m/s時,可在負載比50%下驅動一定行程的質量。
by the thrust and speed characteristics of the impact of the quality of action may change.
Precision linear plate type ER type precision linear plate type rail ER type is a kind of ultra-thin ultra-light linear guide.
ER type is most suitable for precision measuring instruments,
semiconductor manufacturing and testing equipment and other precision linear motion is an important application.
To achieve 5,000min-1 (maximum DN value of 160,000) under long-term continuous drive when the stability of the torque
在周圍溫度為20℃的環境下,電樞繞組平均溫度為90℃時的數值。
※2 較高速度隨分辨率而變化。
例:電機型式…S型、驅動器型號…TD-045CU-200AC-GA20SU、分辨率…0.1μm時,較高速度為0.3m/s。
※3 動作速度、加減速度等規格受負荷質量的限制。
The maximum transportable mass is the mass that can be delivered at an acceleration of about 0.5G.
The RAU type is an ultra-small cross roller collar
with an inner diameter of 10 mm and an outer diameter of 21 mm (minimum model RAU1005).
但根據動作條件的不同,受推力和速度特性的影響,可動作質量可能會發生變化。
直線板式導軌ER型 直線板式導軌ER型是一種薄輕型直線導軌。
ER型適于測量儀器、半導體制造和檢驗設備以及其他直線運動至為重要的應用場合。
實現5,000min-1(較高DN值16萬)下長期連續驅動時穩定的扭矩。
2.(DIN69051)為基準
螺母尺寸以DIN規格(DIN69051)為基準
3.緊湊的螺母尺寸
新研發的薄膜密封減小了螺母長度,實現了裝置的緊湊化設計。
4.豐富的產品種類
軸徑φ15~φ50、導程5~20㎜的組合產品26種。
Compared with the double-row design of angular contact ball bearings, this product is compact and lightweight.
The maximum to make the structure at the same time, also has high rigidity.
※ 4 can be set to send the quality of the acceleration of about 2G,
to reach the maximum speed of 1.0m / s, the load ratio of 50% can drive a certain trip quality.
But depending on the operating conditions,
參見P.26~32“GLM20AP選型方法”。較大可搬送質量為加速度約0.5G時可搬送的質量。
RAU型是內徑10mm、外徑21mm(小型號 RAU1005)的小型交叉滾柱軸環。
YSTHK直線板式導軌,THK直線板式導軌作用
021-39526589
網址:duyguyilmazz.com
地 址:上海市嘉定區嘉涌路99弄
6號樓713室