康茂盛真空吸盤規格,CAMOZZI真空吸盤結構圖

康茂盛真空吸盤規格,CAMOZZI真空吸盤結構圖

吸盤直徑 5 - 52 mm，丁腈橡膠或硅橡膠材質

連接螺紋 M5, G1/8, G1/4（均有內螺紋和外螺紋）

特別適用于表面極其不平整的工件或需要補償很大工件高度的搬運

- handling of flat or uneven surface of the workpiece, such as car shell, tube, carton and so on

- handling fragile fragile parts, such as electronic components, injection molded parts and so on

- Handling of welding parts

VTCN series of corrugated sucker (2.5 pleats) for the pleats

Wrinkled design, composed of threaded joints and rubber parts,

The rubber parts are round. The threaded connector can be inserted directly

The rubber parts are connected together and the threaded fittings and rubber parts can be ordered separately.

application:

類型 由橡膠件和螺紋接頭組成，高耐磨性

結構形式 螺紋接頭和橡膠件不預先裝配

維護保養 可更換橡膠件

工作溫度 丁腈橡膠材質：-30 ÷ 120°C（短時間，< 30s）；-10 ÷ 70°C（長時間）

? 吸盤底部的特殊結構，減少了搬運薄壁零件發生一直變形的可能

? 吸盤上部帶皺褶，剛性好。在高速運動時，可承受較大的橫向負載

- Silicone rubber sucker can be used in high temperature environment

Comprehensive parameters

?Wide range of diameter, rubber parts for the nitrile rubber and silicone rubber two materials (optional)

?The sealing lip is soft and tapering, and it has a strong adaptability to the surface and the uneven workpiece

?Good contact with the workpiece when the buffer performance, strong suction

? 可很好地補償工件高度上的差異

? 2.5 褶的較優化外形

硅橡膠材質：-50 ÷ 220°C（短時間，< 30s）；-30 ÷ 180°C（長時間）

康茂盛真空吸盤規格,CAMOZZI真空吸盤結構圖