FESTO快插式壓力控制閥，F(xiàn)ESTO壓力控制閥選擇要點

FESTO快插式壓力控制閥，FESTO壓力控制閥選擇要點

企業QQ:2880626089

手機（同微信）：17316599802

郵箱：17316599802@163.com

電 話：021-39529830轉8009

傳真；021-39947181

聯系人：鄭娜

? With threaded and push-inconnector

? Screw-in threadM5, Rx, R?

? Push-in connectorfor tubing O.D. 4 ... 8 mm

? Push-in connector, can be rotated360°

The pressure regulator maintains anessentially constant output pressure

The differential pressure regulator

Design Directly actuated piston regulator with through pressure supply

Regulating function With return flow, differential pressure constant

Type of mounting Can be screwed in Mounting position Any

Actuator lock Knurled screw with lock nut

maintains a manually adjustedifferential pressure between the

primary pressure at the screw-inthread and the output pressure at the

差壓調壓閥

接口：M5, G1/8, G1/4, G3/8, G1/2

快插接頭：4, 6, 8, 10, 12 mm

流量：30 ... 760 l/min

在氣源處理元件外使用

帶集成的單向閥

? Minimal dimensions

? Constant output pressure

connection end thanks to anintegrated non-return valve.

on the secondary side independent of pressure fluctuations on the primary

side and air consumption.

The primary pressure at the screw-in hread is reduced when air is

exhausted from the QS push-inconnector.

針對某一動作進行壓力調節，因此能效更高。

連接尺寸 M5, G 1/8, G 1/4, G 3/8, G 1/2

快插接頭

流量 22 … 760 l/min

脫離空氣預處理單元單獨使用

? Version with pressure gauge

? Screw-in thread M5 … R? or

push-in connector ? 4 … 8 mm

QS push-in connector.

Pressure applied at the QS push-inconnector can be exhausted with no

change in pressure at the threadconnection end thanks to an

integrated non-return valve

The pressure regulator maintains an

essentially constant output pressureon the secondary side independent of

pressure fluctuations on the primary

side and air consumption.

The primary pressure at the screw-in

thread is reduced when air is

exhausted from the QS push-in

connector.

FESTO快插式壓力控制閥，F(xiàn)ESTO壓力控制閥選擇要點